31An ongoing program of product improvement may require us to changespecications without notice. BL-RFG-CE, BL-RFG-W-CE,Revised February 2015. Doc no: M0027.02info@woodstone-corp.com or visit woodstone-corp.comwood stone corporation1801 w. bakerview rd.bellingham, wa 98226 usat. +1.360.650.1111f. +1.360.650.1166Bistro CE Installation and Operation ManualFUELWOOD FACTSWHAT TYPE OF WOOD SHOULD YOU USE TO FIRE YOUR SOLID FUEL COOKING EQUIPMENT?The answer to this question depends on several considerations: geographical location, availability and relative cost of variousfuelwood species and individual preferences regarding the flavor qualities of various wood types� There are a wide variety of goodfuelwood species in all geographic locations� Each species of wood has different characteristics� The table below should help weighthe pros and cons of various types of wood� Wood from conifers (pine trees) is not recommended due to its poor fuelwood charac-teristics (low weight, low-med heat, poor coaling, high sparking and high residual creosote)�Whichever type of wood you use, MAKE SURE YOU KNOW THE MOISTURE CONTENT. Properly seasoned wood contains 20%moisture or less� If wood contains more than 20% moisture, it should not be accepted for use� Wood should be stored off the groundand out of the rain in an environment that allows good air circulation so that the drying process can continue� Wet wood is the mostcommon operational difficulty associated with wood-fired cooking equipment� Wood Stone’s optional Mini-Ligno E Wood MoistureMeter can save you from paying for water when you thought you were paying for wood (see the Tools & Accessories section ofwoodstone-corp.com, contact your dealer or Wood Stone)�** The desirability of variousfragrances is largely a matterof personal preference�Wood Type Heat kg / Cord* Lighting Coaling Sparks Fragrance**Alder Med-Low 1130 Fair Good Moderate SlightApple High-Med 2000 Fair Excellent Few ExcellentAsh High 1590 Fairly Difficult Good-Excellent Few SlightBeech High 1720 Difficult Excellent Few GoodBirch (white) Medium 1360 Easy Good Moderate SlightCherry Medium 900 Fair Excellent Few ExcellentElm High 1045 Very Difficult Good Very Few FairHickory Very High 1900 Fairly Difficult Excellent Moderate ExcellentMaple (red) High-Med 1450 Fairly Difficult Excellent Few GoodMaple (sugar) High 1680 Difficult Excellent Few GoodMesquite Very High Very Difficult Excellent Many ExcellentOak (live) Very High 2090 Very Difficult Excellent Few FairOak (red) High 1680 Difficult Excellent Few FairOak (white) Very High 1900 Fairly Difficult Excellent Few FairPecan High Fair Good Few GoodCalculate your approximate monthly, daily and hourly fuel-wood costs using the following formulas:The cost of well-seasoned hardwood varies greatly with geographical location�Cost per month = A x C Cost per day = A x C Cost per hour = A x C30 3012 hr dayA = Cost/cord (from wood supplier)B = kg/cord (from above table)C = Cords/mth (from experience, or call Wood Stone for an estimate)When burned, a kilo of any wood releases approximately 4�2 kWh (14300 BTU/hr), so it is better to comparethe price of wood by the pound rather than by the cord� A full cord of wood measures 1�2 m x 1�2 m x 1�2 mwhen stacked�Cost per lb = AB( )* Cord / Stere conversion1 cord = 3�6 steres1 stere = �27 cords