XP PLS600 Series User Manual
Also see for PLS600 Series: Programming manual
                                           | |
Contents
| 
PLS6001. Safety SummaryThe following safety precautions apply to both operating andmaintenance personnel and must be observed during all phasesof operation, service, and repair of this instrument. Beforeapplying power, follow the installation instructions and becomefamiliar with the operating instructions for this instrument.Failure to comply with these precautions or with specificwarnings elsewhere in this manual violates safety standards ofdesign, manufacture, and intended use of the instrument.XP Power assumes no liability for a customer’s failure to complywith these requirements.GROUND THE INSTRUMENTTo minimize shock hazard, the instrument chassis and cabinet must be connected to an electrical ground. This instrument isgrounded through the ground conductor of a three-conductor AC power cable. The power cable must be plugged into anapproved three-conductor electrical outlet. Do not alter the ground connection. Without the protective ground connection, allaccessible conductive parts (including control controls) can render an electric shock. The power jack and mating plug of theprovided power cable meet IEC safety standards.DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHEREDo not operate the instrument in the presence of flammable gases or fumes. Operation of any electrical instrument in such anenvironment constitutes a definite safety hazard.KEEP AWAY FROM LIVE CIRCUITSInstrument covers must not be removed by operating personnel. Component replacement must only be made by qualifiedmaintenance personnel. Removal of the cover will void the warranty. Under certain conditions, even with the power cableremoved, dangerous voltages may exist. To avoid injuries, always disconnect power and discharge circuits before touchingthem.DO NOT SERVICE OR ADJUST ALONEDo not attempt any internal service. This unit contains no user serviceable components. Removal of the cover will void thewarranty.DO NOT SUBSTITUTE PARTS OR MODIFY THE INSTRUMENTDo not install substitute parts or perform any unauthorized modifications to this instrument. Return the instrument to XP Powerfor service and repair to ensure that safety features are maintained. |
Related manuals for XP PLS600 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine