XP PLS600 Series User Manual
Also see for PLS600 Series: Programming manual
                                           | |
Contents
| 
147.2.2 ModeSee Appendix A for analog control setup, Appendix B for USB control setup, and the PLS600 USB-Analog Programming Manualfor information on serial command syntax and on LXI usage.7.2.2.1 USB/AnalogThe Mode menu allows the user to choose between local control or remote control. If remote control is chosen the user canfurther select if the control is to be analog voltage control or USB control. The Mode screen shown below is the entry point forthese choices..System set upmodemodelocalModeremoteModeAnalog voltageModeAnalog currentModeAnalog dualRotating either rotary control clockwise will show the following screens:When the desired mode is displayed press the output on/off button to select it. If LOCAL or REMOTE is selected, no furthersetup is required and the display will return to the setup main menu.If REMOTE is selected the front panel will be locked out and control will be through the Ethernet port, USB port or analog inputsexclusively. |
Related manuals for XP PLS600 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine