|
DVR User’s Manual253.6.2 Preset Record ConfigurationThe is used to select the preset recording quality and framerate. In normal circumstances, it is strongly recommended to set the presetconfiguration as . Below table shows the PPS and picture sizeunder in Half-D1 mode. Please refer to OSD Setup Manual,Section Preset Record Configuration for further information.Half-D1 mode (NTSC: 720x240@120PPS; PAL: 720x288@100PPS)Normal PPS Normal Size Event PPS Event Size7.5 NTSC(6.25 PAL) 12 KB / Pic 30 NTSC(25 PAL) 12 KB / Pic3.6.3 Per Camera ConfigurationThis function is used to set the Day / Night / Weekend PPS (Picture perSecond) and Quality for each channel. The Preset Configuration must be setto for accessing these schedules. The menu is displayed as below(Record Mode: 720×240@120PPS in NTSC / 720×288@100PPS in PAL).Per Camera ConfigCameral SelectNormal PPSNormal QltyEvent Max PPSEvent QltyEvent ActDay7.5Mid30BestBothNight7.5Mid30BestBothCH1Weekend7.5Mid30BestBoth• First, select a Camera for setting its record configuration. The image andrecording settings from the selected camera will be displayed on thescreen.• Move the cursor using Direction keys and press ENTER to select an item.• Change the value using UP / DOWN keys.• Press ENTER to confirm the settings or ESC to abort.• Press ESC to return to Record Setup menu.Please note that the total normal PPS for all channels cannot exceed 120NTSC (720×240@120PPS) / 100 PAL (720×288@100PPS). To increase onechannel’s PPS, others’ may have to be reduced first. Event PPS is notrestricted to this rule, since a smart event scheduler will handle the total PPSwith a correct weighting.
|
