|
DVR User’s Manual263.6.4 Record Event Video OnlyIf the DVR shall start recording only when alarms are triggered, follow thesteps below:• Enter the OSD setup menu with correct password.• In the OSD setup menu, select menu. Move the cursor tothe item , and select .Refer to OSD Setup Manual, Section Preset Record Configuration forfurther information.3.6.5 ezRecord SetupThis item aims to ease the complicated record settings, and to make thesetup much easier. Note that the item can be reached only when is selected as the option for .Select from and press ENTER, thesub-menu appears as below figure:ezRecord SetupHow Many Days To RecordDaytime RecordNight RecordWeekend RecordAverage Normal PPSAverage Normal Quality2 DaysYesYesYes15BestFollow these steps to Setup ezRecord:• Select and press ENTER, then pressUP/DOWN to choose an option. The average normal PPS & Quality willbe adjusted automatically. The maximum of days depends of the size ofthe installed HDD(s). In other words, the larger the size of the HDDinstalled, the more days the unit can record.• Move to and press ENTER. This item will determinewhether the DVR will record during daytime. If yes, use UP/DOWN toselect as to enable daytime recording; or select to disable.• Repeat the same procedures through the 3rd and 4th item, respectively.Note that Record> will be inaccessible if Schedule> in is set to .Record Info
|
