DVR User’s Manual48• Press 1 to access the Set/Go Preset function. The Dome Preset menu isdisplayed.Dome PresetFirst PageIndex1234567Set PresetNoNoNoNoNoNoNoGo PresetNoNoNoNoNoNoNo• Use UP / DOWN keys to select the desired preset number from the menu.• Set the of the selected preset number to , and pressENTER to save the position. Now the preset is set and ready to be called.4.5.6 Call Preset PointsFollow the steps to call preset points.• Press a Channel key to view the corresponding camera in full screen.• Then press DOME to enter dome control mode. Then a Hint Screen,shown as blow figure, will display on the screen.• Press 2 to hide the dome control Hint Screen; press 2 again to toggle theHint Screen.• Press 1 to access the Set/Go Preset function.Dome PresetFirst PageIndex1234567Set PresetNoNoNoNoNoNoNoGo PresetNoNoNoNoNoNoNo• Use UP / DOWN keys to select the desired preset number from the menu.• Set the of the selected preset number to , and pressENTER to call the preset point.• Now the selected dome camera rotates to the preset position automatically.
