C ONNECTING TO THE N ETWORK 10Stages of installation on the networkInstallation can be performed by a network or printing administrator. The stages of asuccessful installation are:1 Configuring the network environmentConfigure network servers to provide users with access to the Fiery EXP4110 as a networkedprinter. For information about configuring network servers in Windows and UNIX networkenvironments as they relate specifically to the Fiery EXP4110, see page 12. For informationabout using your network, see the documentation that accompanies your network system.2 Physically connecting the Fiery EXP4110 to a functioning networkPrepare a network node for the Fiery EXP4110. Obtain cable, route it to the location wherethe Fiery EXP4110 is to be installed (near the printer), and attach the cable to the networkconnector of the Fiery EXP4110. For details, see page 20.3 Setting up the Fiery EXP4110Configure the Fiery EXP4110 for your printing and network environment (see Setting up theFiery EXP4110 from the Control Panel).4 Preparing user computers for printingInstall the files needed for printing, install user software, and connect the user computers tothe network. The software installation is described in Printing from Windows and Printingfrom Mac OS.5 Administering the Fiery EXP4110Monitor and maintain system performance and troubleshoot problems that may arise(see Administering the Fiery EXP4110).
