Xerox 4110 Configuration And Setup

Also see for Fiery EXP4110: Guide for Operators Customer release notes Print Options Printing guide

Contents

Xerox 4110 Configuration And Setup Manual pdf 32 page image

S ETTING UP THE F IERY EXP4110 FROM THE C ONTROL P ANEL 32Suspend On MismatchYes/No [No]Select Yes if you want the Fiery EXP4110 to hold a job if the job cannot print because ofmissing resources. While the job is suspended, other jobs continue to process and print.Save ChangesYes/No [Yes]Select Yes to activate any changes made in Server Setup. Select No to return to the main Setupmenu without making any changes.Network Setup optionsWhen you perform Network Setup, you configure the Fiery EXP4110 to receive print jobsover the network systems that are used at your site.In the Setup menu, choose Network Setup, where you specify network addresses and namesto be used by workstations, servers, and the Fiery EXP4110 when they communicate witheach other.The Network Setup menu includes three submenus that allow you to choose port types,protocols, and network services. You must perform Port Setup and enable at least one port.You should display and select options only for the network systems that are currently used atyour site. If your network requirements change, you can change Network Setup at any time.If the Fiery EXP4110 is configured to enable more than one protocol, it automaticallyswitches to the correct protocol when it receives a print job.The available network types, and the Setup areas that pertain to them, are summarized in thefollowing table.For this network orconnection typeUse this Port Setup Use this Protocol Setup Use this Service SetupAppleTalk over Ethernet Ethernet Setup AppleTalk Setup AppleTalk printing (PAP) isenabled automaticallyTCP/IP over Ethernet Ethernet Setup TCP/IP Setup: Ethernet Setup See the items for “Service Setupoptions” on page 39, except forPServer Setup.IPX/SPX over Ethernet Ethernet Setup IPX/SPX Setup PServer Setup (NDS, Bindery,or both)