Xerox 4505/4505ps User Manual

Also see for Phaser 4510: Features System administrator guide Install guide Quick use guide Install guide

Contents

Xerox 4505/4505ps User Manual Manual pdf 171 page image

D i s p l a y e d C o n t r o l P a n e l M e s s a g e sC h a p t e r 7 : T r o u b l e s h o o t i n gv 7-5Control Panel messages are listed in alphabetical order inFigure 7.2, preceded by numerical diagnostic error codes.Not listed are the Control Panel menu options, settings, orfunctions covered in Chapter 3: Using the Control Panel.Some two-line messages are separated by the top line andbottom line. In these instances, look up each line of themessage separately.In Figure 7.2, “ACTION” indicates what you must do torespond to or clear the message.You might see a five digit number in the lower right of theControl Panel. Five-digit codes are for use by manufacturingand service centers only. The user can ignore five-digit codes.Figure 7.2 Control Panel messagesMessage Description/Action0001†† Appears in the top leftside of the display.Indicates which modulefailed.The main controller board has failed.ACTION: Replace controller, or contact your dealer or Xerox / Rank Xerox.0040†† Appears in the top leftside of the display.Indicates which modulefailed.A PostScript checksum error has occurred.ACTION: The PostScript card has failed and needs to be replaced.0100†† Appears in the top leftside of the display.Indicates which modulefailed.SIMM in slot 0 has failed.ACTION: Move the SIMM to Slot 1; see “Installing a SIMM” (page 5-4). If amemory error (0101) occurs again, replace the SIMM. If there is no error, the maincontroller board has failed. Contact your dealer or Xerox / Rank Xerox.DisplayedControl PanelMessagesNoteAUG-CH07 Page 5 Black,Cyan Friday, February 3, 1995 12:34 AM