Scanning106 WorkCentre 6015 Color Multifunction PrinterUser GuideLoading Documents for ScanningPosition the original document as shown.Document GlassLift the automatic document feeder orthe document glass cover, then place theoriginal face down in the upper left cornerof the document glass.Automatic Document FeederInsert originals face up with the top of the pageentering the feeder first. Adjust the paper guides sothey fit against the originals.Automatic Document Feeder GuidelinesNote: Available on WorkCentre 6015N/NI Color Multifunction Printer only.The automatic document feeder accommodates the following originals: Width: 148–216 mm (4.1–8.5 in.) Length: 210–355.6 mm (8.3–14 in.) Weight: 60–105 g/m² (16–28 lb. Bond)Follow these guidelines when loading originals into the automatic document feeder: Load originals face up so that the top of the document enters the feeder first. Place only loose sheets of paper in the automatic document feeder. Adjust the paper guides so that they fit against the originals. Insert paper in the automatic document feeder only when ink on the paper is dry. Do not load originals above the MAX fill line.
