Installation and Setup68 WorkCentre 6015 Color Multifunction PrinterUser Guide Name of Shared Directory: Enter a name for the directory or folder. For example, if you wantthe scanned files to go in a folder named scans type /scans. Subdirectory Path: Enter the path of the folder on the FTP server. For example, if you want thescanned files to go in a folder named colorscans inside the scans folder, type /colorscans.5. Click Save Changes.Now you can scan to a folder on your computer. For details, see Setting Up Scanning to a Shared Folderon Your Computer on page 65.Setting Up Scanning to an FTP ServerNote: Before setting up scanning to an FTP Server, it must have the proper software installed and beconfigured with shared folders for each user.1. At your computer, open a Web browser, type the IP address of the printer in the address field, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer onpage 55.2. In CentreWare Internet Services, click Address Book.3. Under Network Scan (Comp./Serv.), click Computer/Server Address Book.4. Click Add next to any blank field, and enter the following information: Name: Enter the name that you want to appear in the Address Book. Network Type: Select Server (FTP). Host Address: Enter the IP address or DNS name of the FTP server. Port Number: Enter the default port number for FTP, 21, or select a number from the rangeprovided. Login Name: Enter a valid login name for your FTP server. Password: Enter a valid password for your FTP server. Re-enter Password: Enter the password again. Name of Shared Directory: Enter a name for the directory or folder. For example, if you wantthe scanned files to go in a folder named scans type /scans. Subdirectory Path: Enter the path of the folder on the FTP server. For example, if you want thescanned files to go in a folder named colorscans inside the scans folder, type /colorscans.5. Click Save Changes. A new address book entry is created.Now you can scan to the FTP server.