Copying98 WorkCentre 6015 Color Multifunction PrinterUser GuideImage-Quality SettingsThis section includes: Reducing or Enlarging the Image .............................................................................................................................. 98 Making the Image Lighter or Darker ........................................................................................................................ 98 Adjusting the Sharpness ................................................................................................................................................ 98 Setting Auto Exposure .................................................................................................................................................... 99Reducing or Enlarging the ImageYou can reduce the image to as little as 25% of its original size or enlarge it as much as 400%.To reduce or enlarge the copied image:1. To select Reduce/Enlarge, press the arrow buttons, then press OK.2. Do one of the following: To select a preset image size, press the arrow buttons. To set the copy size in increments of 1%, press the arrow buttons or use the keypad to set thepercentage. The default setting is 100%.3. Press OK.Making the Image Lighter or Darker1. To select Lighten/Darken, press the arrow buttons, then press OK.2. To lighten or darken the image, press the arrow buttons to move the slider.3. Press OK.Adjusting the Sharpness1. To select Sharpness, press the arrow buttons, then press OK.2. Select a sharpness setting: Sharpest Sharper Normal Softer SoftestThe default setting is Normal.3. Press OK.