Message ListThis section explains messages that may be displayed during printing using thelpr command. These messages depend on the system because they are outputfrom the client workstation.Status: The lpd daemon on the client failed to create a control file.Action: Check the spool directory.Status: The data is too large to store in the spool directory.Action: Extend the spool directory area or attach the [-s] flag, then execute the lprcommand using a symbolic link.Status: Cannot start the lpd daemon on the client.Action: Restart the daemon by the lpr command.Status: The queue is stopped.Action: Restart the daemon by the lpr command.Status: A printer that is not registered in the system was specified.Action: Check the printer registration in the [/etc/printcap] file.Status: Failed to delete job No.XX in the print service queue.Action: Check by the lpq command whether the specified job has already changedfrom the wait status in the queue to the processing status.Cannot create /usr/spool/pltXXX/.seqCopy file is too largeXXprinter:Jobs queued, but cannot start daemonXXprinter:Printer queue is disabledXXprinter:Unknown printerjobXX can not dequeue
