1.3 Power On/OffThe scanner and the printer are each equipped with a power switch. The CircuitBreaker Switch must be in the ON position to switch the printer and scannerpower on and off. No power is consumed when the Circuit Breaker Switch is inthe OFF position, even though the power plug is connected to the power source.Powering On1 Set the Remote Switch to [Connect].2 Switch ON the Scanner Power Switch.3 Switch ON the Circuit Breaker Switch.4 Switch ON the Main Power Switch.When the Remote Switch is set to[Connect], and the Scanner PowerSwitch is set to ON, the Main PowerSwitch controls power to both the Printerand the Scanner.Scanner PowerSwitchMain PowerSwitchCircuit Breaker
