3.3 Communication Parameter Setup(Print Services on Web)The communication parameters for TCP/IP, Serial, Centronics (optional), VPI(optional), and SNMP can be set up from Print Services on Web. These procedures areexplained below.Procedure1 Start Print Services on Web, enter the Administrator mode, and select the[Properties] tab.• The machine must be rebooted for the changes to take effect.• These procedures are performed in the Administrator Mode.Refer to "2.3 Print Services on Web" for details about starting Print Serviceson Web and logging on as Administrator.The displayed [Print settings] were set up earlier using the selections on the[Print Setup] and the [Properties] tabs. The hardware configurationinformation is stored in the machine’s controller.
