RJ-901C/RJ-900C Maintenance Manual 4 Parts Replacement4-634.9.2 Replacing P_REAR Sensor AssemblyNOTEBefore replacing parts in the P_REAR sensor assembly, remove the following covers.• Rear cover: "4.2.7 Removing Media Guide R2" p.4-141. Remove the PF_REAR sensor assembly connector from the main board assembly.2. Take the P_REAR sensor assembly cable off the clamp.3. Remove the screw retaining the PE sensor plate to the frame (tapping screw M3 × 6, S tight cup: 1pce).4. Remove the screw retaining the P_REAR sensor assembly to the PE sensor plate (cup screw M2 × 6:2pce).5. Replace the P_REAR sensor assembly.No. Part name1 P_REAR sensor assembly2 PE sensor plate screw3 PE sensor plateNo. Part name1 P_REAR sensor assemblyscrew2 P_REAR sensor assembly3 PE sensor plate123123
