RJ-901C/RJ-900C Maintenance Manual 10 Appendix10-310.4 Jigs and ToolsThis section provides lists of jigs and tools required for service operations.10.4.1 Required Tools(1) Tools for Part Replacement(2) Tools for AdjustmentTable 10-2 Tools for Part ReplacementNo. Name Part number Remarks1 Phillips driver No.2 Generic product More than 250mm shaft length isrecommended2 Phillips driver No.2 Generic product Less than 50mm shaft length isrecommended3 Phillips driver No.1 Generic product4 Flat-head driver Generic product5 Longnose plier Generic product6 Tweezers Generic product7 Hex wrench (opposite side:6mm)Optional standaccessory (Genericproduct)Required only when disassembling legsTable 10-3 Tools for AdjustmentNo. Name Part number Remarks1 Personal computer Generic product2 Tension gauge Generic product Max. 10,000gf (100N) for measurement3 Tension gauge Generic product Max. 4,000gf (40N) for measurement4 A4 matte film "Dia mat super A4"manufactured byKimoto Co.,LtdUsed for media sensor adjustment(P_REAR sensor and P_EDGE sensor)5 Coated paper Exclusive use media For plot quality adjustment6 Straight scale (1000mm) Generic product
