3 Specifications RJ-901C/RJ-900C Maintenance Manual3-23.1 IntroductionThis chapter explains the specifications of the product, optional parts, and supplies. Installation environmentrequirements are also explained.3.2 Product Specifications(1) Main Unit SpecificationsItem SpecificationsModel name RJ-901C RJ-900CPlotting method On-demand piezo driveMotor driving method Firmware servo/DC motor driveMedia feeding method Multi-point pressure grid roller methodMedia fixing method Pressurizing roller manual-down methodMedia supply andejectionCut media Front feeding/front paper ejectionRoll media Front feeding/front paper ejectionMedia type Tracing paper, plain paper, film, coated paper, glossy paperRoll media outerdiameter2-inch 100 mm or less 150 mm or less3-inch 100 mm or less 150 mm or lessMaximumloadable medialengthCut media 1200 mm (47.2 in.) 1600 mm (63.0 in.)Roll media 50 m (164.0 ft.)Maximum loadable media width 610 mm (24.0 in.) 1080 mm (42.5 in.)Maximum PlotlengthCut media 1180 mm (46.4 in.) 1580 mm (62.2 in.)Roll media 18 m (59.1 ft.)Maximum media width 604 mm (23.8 in.) 1074 mm (42.3 in.)Plotting margins Cut media Top: 3mm, Bottom: 17mm, Left:3mm, Right: 3 mmRoll media Top: 3mm, Bottom: 3mm, Left:3mm, Right: 3 mmMedia cutting method Lateral auto-cutHead height adjustment 2 levels: Normal / HighDistance accuracy ± 0.25 mm or ± 0.1% of moving distance or less• Used media: Matte film 50μm• Operating temperature: 20ºC (68F)• Operating humidity: 60%• Plot mode: High qualityRight angle accuracy ±0.1mm or less against the moving distance (500.0mm)• Used media: Matte film 50μm• Operating temperature: 20ºC (68F)• Operating humidity: 60%• Plot mode: High quality
