5 Self-Diagnosis Mode RJ-901C/RJ-900C Maintenance Manual5-425.5.10 Top and Bottom Adjustment MenuThis menu is used to adjust the printing margins.To adjust the margins, follow the steps below.1. Set media as necessary.2. After media is set, the machine prints out band feed correction adjustment patterns and cuts the media inthe following modes.• Black, 1 pass, unidirectional, 360 dpi3. Check the printed top & bottom adjustment patterns for the following points.• Top distance• Bottom distance• Side margin1: Top distance2: Bottom distance3: Side margin4: Media feed direction4. Enter each measured value as the parameter.2134TOPPrevious menuNext menuPrevious menuNext menuPrevious menuNext menuTop Length: 0.1㨙㨙 incrementsBottom Length: 0.1㨙㨙 incrementsSide Margin: 0.1㨙㨙 increments
