Safety14 Xerox ® WorkCentre® 7220/7220i/7225/7225i Color Multifunction PrinterUser GuideEmergency Turn OffIf any of the following conditions occur, turn off the printer immediately and disconnect the power cordfrom the electrical outlet. Contact an authorized Xerox service representative to correct the problem if:• The equipment emits unusual odors or makes unusual noises.• The power cable is damaged or frayed.• A wall panel circuit breaker, fuse, or other safety device has been tripped.• Liquid is spilled into the printer.• The printer is exposed to water.• Any part of the printer is damaged.Telephone Line CordWARNING: To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or largertelecommunication line cord.Laser SafetyThis printer complies with laser product performance standards set by governmental, national, andinternational agencies and is certified as a Class 1 Laser Product. The printer does not emit hazardouslight because the beam is totally enclosed during all modes of customer operation and maintenance.WARNING: Use of controls, adjustments, or performance of procedures other than those specified inthis manual can result in hazardous radiation exposure.
