Windows 2000, Windows XP, and Windows Server 2003WorkCentre® C2424 Copier-Printer6-14Windows 2000, Windows XP, and Windows Server2003This section includes:■ "Preliminary Steps" on page 6-14■ "Quick CD-ROM Install Steps" on page 6-14■ "Other Methods of Installation" on page 6-15■ "Windows 2000, Windows XP, Windows Server 2003 Troubleshooting (TCP/IP)" onpage 6-18■ "infoSMART Knowledge Base Documents (English only)" on page 6-19Preliminary StepsThese preliminary steps must be performed for all copier-printer systems:1. Verify that the system is plugged in, turned On, and connected to an active network.2. Verify that the system is receiving network information by monitoring the LEDs on theback of the device or on the CentreDirect External Print Server. When the system isconnected to a functioning network and receiving traffic, its link LED is green, and itsamber traffic LED is flashing rapidly.3. Proceed to “Quick CD-ROM Install Steps” or “Other Methods of Installation” for theinstallation method desired.4. Print the “Configuration Page” and keep it for reference.Quick CD-ROM Install Steps1. Insert the WorkCentre C2424 Software CD-ROM into the computer’s CD-ROM drive. Ifthe installer does not launch, do the following:a. Click Start, then click Run.b. In the Run window, type: :\INSTALL.EXE.2. Select your desired language from the list.3. Select Install Printer Driver.4. Click I Agree to accept the Xerox Software License Agreement.5. In the Select Printer dialog box, the default Use Walk-Up Technology (recommendedfor network printers) is selected. Click Next.6. Follow the Use Walk-Up Technology instructions displayed.7. Click Exit Program.NoteIf the Walk-Up Technology dialog box remains onscreen after you have completedSteps 1–6, click the Back button, then click Select from the following discoveredprinters. Follow the onscreen prompts to complete the installation procedure.
