System SettingsWorkCentre® C2424 Copier-Printer1-18Changing the Load Paper TimeoutWhen your print job is formatted for a type or size of paper that is not loaded in the system, thecontrol panel displays a message requesting you to load the appropriate paper. The Load PaperTimeout controls the amount of time the system waits before printing on another type or sizeof paper.To change the load paper timeout, use either:■ The control panel■ CentreWare ISUsing the Control PanelTo change the load paper timeout:1. On the control panel, press the System Setup button.2. In the menu, select Job Defaults Setup, then press the Enter button.3. Select Print Defaults Setup, then press the Enter button.4. Select Paper Handling Setup, then press the Enter button.5. Select Load Paper Timeout, then press the Enter button.6. Scroll to the desired timeout value. The values (None, 1, 3, 5, or 10 minutes, 1 hour or24 hours) indicate the length of time you want the printer to wait for you to load paperbefore printing. If you select a value of None, the printer does not wait for paper to beinserted and immediately picks paper from the default tray.7. Press the Enter button to save the change.Using CentreWare ISTo change the load paper timeout:1. Launch your web browser.2. Enter your system’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).3. Click Properties.4. Click the General folder on the left sidebar, then click Printer Defaults.5. Scroll to Timeout Settings, then select a value from the Load Paper Timeout drop-downlist. The values (None, 1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time youwant the system to wait for you to load paper before printing. If you select a value ofNone, the system does not wait for paper to be inserted and immediately picks paper fromthe default tray.6. Click Save Changes at the bottom of the screen.
