Xerox ® DocuMate® 4760User’s Guide173Driver ConfigurationUse the Driver configuration section to configure the add-on modules, select interface options, and view thescanner hardware properties. When the Advanced configuration mode is selected, a scanner panel option will beavailable for you to change any hardware settings that may be available for your scanner.Disabled Options in this SectionSome options in the interface may be grayed out and cannot be selected. Grayed out options are either notappropriate for the current scanner, the software needed to enable the feature is not installed, or the feature isdependent on another setting in the scanner's interface. Hover the mouse cursor over a grayed out feature to seeinformation about why the feature is unavailable.Module ConfigurationWhen image processing modules are installed they will appear in the list on the Configure tab. Use this tab toenable the modules you want to use when scanning.There are some features in the scanner interface that are disabled until a module is installed that contains thoseoptions. When the module is installed, the features will enable in the scanner interface for you to use them.Reordering the ModulesSelect a module in the list and click the up or down arrow to change the order of the module in the list. Changing theorder of the modules changes the order in which the image processing options are used. For example, if there aretwo modules installed and both modules include an automatic image rotation option, the first module's rotateoption is used and the rotate setting in the second module is ignored so that the image is not rotated twice.
