Xerox ® DocuMate® 4760User’s Guide60Redaction Settings TabUse the options on the Redaction Settings tab to remove a specified area in the scanned image.Please refer to the technical note, at the end of this section, for information about how this setting works with otheroptions in the OneTouch Scan Configuration you are modifying.Enable redaction—select this option to enable redaction when scanning. You might use this option if you want toremove a logo or image that appears on each page that you are scanning. You can choose what color to fill in theredacted area in the scanned image, and set multiple areas. If you are scanning in Duplex mode, you can specifythe area separately for the front and back side of the pages.Click Add to add a line item to the area list in this window. You can redact multiple areas from the scanned image,click the Add button again to continue adding line items to the list. Select an item in the list then click the Removebutton to remove the specified redaction area from the list.Side—click once on the word Front to show the Side option list. If you are using a simplex (one-sided) scanner, onlythe Front option will be available. If your scanner supports duplex (two-sided) scanning, the options Front, Back,and Both will be available in the list.• Front—this is the Simplex side of the page. The area(s) specified for the Front will only apply to the Simplexside of the page when scanning in Duplex. Therefore, if you scan 4 double-sided pages, the resulting imagefile(s) will have redacted areas on pages 1, 3, 5, and 7.• Back—this is the Duplex side of the page. The area(s) specified for the Back will only apply to the Duplex sideof the page when scanning in Duplex. Therefore, if you scan 4 double-sided pages, the resulting image file(s)will have redacted areas on pages 2, 4, 6, and 8.
