Xerox ® DocuMate® 4760User’s Guide195The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages must be scanned instraight. Adjust the paper guides on the scanner so pages feed in straight.Problem: The paper jams the ADF.To reduce the number of paper jams, smooth and straighten the paper before scanning, and adjust the guides tothe paper size. Paper fed into the ADF at an angle can cause the feed mechanism to jam. If paper jams areoccurring more frequently, try cleaning the roller with a soft cloth dampened with Isopropyl rubbing alcohol.Excessive dust on the roller can make it appear worn and will cause issues feeding paper. See Cleaning the Scanneron page 184 for cleaning instructions.Problem: If the USB cable is disconnected during a scan, the scanner does not reconnect when the USB cable isplugged back in.Unplug the power cable from the scanner, and then plug it back in.If the scanner does not reconnect:1. Unplug the power cable from the scanner.2. Restart your computer.3. After the restart is complete, plug the power cable back in.Problem: Paper jams when it begins scanning from the input tray.Make sure the front feed tray is closed, and that an item isn’t already in the scanner fed in from the front.Problem: The scans from the input tray are always crooked.Make sure to align the paper guides to the edges of the paper. If you are scanning small items that are smaller thanthe paper guides’ minimum adjustment, scan these items from the front feed tray instead.Problem: The scanner reports a Double Feed error when there is only one page in the scanner.Try cleaning the double feed detection sensor. Dust on the sensor may prevent the sensor from working properly.Error Light Troubleshooting CodesThe status light indicates the current state of the scanner. Descriptions of the most common patterns are listedbelow. Contact Xerox Technical Support if you experience a different blinking pattern.
