Xerox ® DocuMate® 5445 / 5460User’s Guide166Scanner Model Panel OptionsThe options in this panel are specific to the scanner you are using. If you select an option in this panel that alsoappears on the Main panel, when you return to the Main panel, that option will be selected. Select the Advancedsource configuration mode to show this panel.Detect Double FeedsDetect double feeds is the scanner's ability to detect when two or more pages are fed through the scanner at thesame time. When this option is turned on, ultrasonic waves are aimed at the document to detect multiple pages bythe level at which the waves pass through the pages. The accuracy of this sensor depends on paper thickness andwhether or not creasing is in the original document.This option is available in the interface only if the current scanner supports this feature.Adjusting the sensitivity levelClick on the scanner model panel to set the sensitivity level at which the scanner detects double feeds. Move theslider left or right to adjust the sensitivity level.• Low works best with paper weight higher than 22lb (80 g/m2 or higher).• Normal works best with standard printer paper weight 18lb or 20lb (67 - 75 g/m2).• High works best with paper weight lower than or equal to 16lb (60 g/m2 or lower).Technical Note:If you are getting false double feed errors, try cleaning the inside of the scanner. Excessive dust on the sensor cancause false double feed errors. Refer to the maintenance section of the scanner's user guide for instructions oncleaning the scanner.Skew detectionThis option detects when a page has been fed through at an angle. Select an option from the drop menu to turn onthis feature. When scanning, always make sure the paper guides have been properly adjusted to the width of thedocuments in the input tray. This helps to prevent the pages from being pulled through at an angle.
