Scanning From One Touch DocuMate 70016 User’s GuideDefault One Touch SettingsOne Touch is your main scanning interface for using the scanner. Based on the recommendedinstallation of PaperPort and the scanner driver, your scanner is pre-configured to scan items forvarious basic tasks, such as email or fax, then send the scanned image to a DestinationApplication.You can change any of these settings. Please see “Configuring the One Touch Buttons” onpage 20 for instructions.For example, the eMail button is set up to scan documents then immediately attachthem to a new eMail message in your default eMail program. The email applicationwill default to the email program specified in the internet options of Internet Explorer.A folder icon for a button means that the button is set up to archive the scanned item.The scanner sends the scanned image directly to a folder without opening the imagefirst in a Destination Application.A question mark for a button means your computer does not have the appropriatesoftware or hardware for the initial factory settings. In that case, you would probablywant to change the name and Destination Application to something else.If PaperPort, OmniPage or One Touch OmniPage is not installed, then the options forsending to word processing applications such as Microsoft Word will not be available.NOTE: The default page size in each configuration is based on your computer’sWindows setup of United States or Metric Units.• If United States is the selected measurement, the default page size in each profile will bebased on the United States standard page sizes such as 8.5” x 11”.• If Metric is the selected measurement, the default page size in each profile is based on theISO 216 standard and the majority of the profiles will default to A4.