Xerox DocuMate 700 User Manual

Also see for DocuMate 700: Specifications User guide Quick start guide User manual Specifications

Contents

User’s Guide 87DocuMate 700 AppendicesAppendix D: Electrical InformationWarning - Electrical Safety Information1. The power receptacle for the machine must meet the requirements stated on the dataplate on the rear of the machine. If you are not sure that your electrical supply meets therequirements, please consult your local power company or an electrician for advice.2. The socket outlet shall be installed near the equipment and shall be easily accessible.3. Use the power cable that is supplied with your machine. Do not use an extension cord orremove or modify the power cord plug.4. Plug the power cable directly into a correctly grounded electrical outlet. If you are not surewhether or not an outlet is correctly grounded, consult an electrician.5. Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks aground connection terminal.6. Do not place this equipment where people might step or trip on the power cable.7. Do not place objects on the power cable.8. Do not override or disable electrical or mechanical interlock devices.9. Do not push objects into slots or openings on the machine. Electrical shock or fire mayresult.Electrical Supply1. This product shall be operated from the type of electrical supply indicted on the product’sdata plate label. If you are not sure that your electrical supply meets the requirements,please consult your local power company for advice.2. WARNING: This equipment must be connected to a protective earth circuit. Thisequipment is supplied with a plug that has a protective earth pin. This plug will only fit intoan earthed electrical outlet. This is a safety feature. If you are unable to insert the plug intothe outlet, contact your electrician to replace the outlet.3. Always connect equipment to a correctly grounded power outlet. If in doubt, have theoutlet checked by a qualified electrician.Disconnect DeviceThe power cable is the disconnect device for this equipment. It is attached to the back of themachine as a plug-in device. To remove all electrical power from the equipment, disconnect thepower cable from the electrical outlet.