Xerox DocuPrint 4512 Setup Manual

Also see for DocuPrint 4512: User guide

F o n t s4-6 ❖ D o c u P r i n t 4 5 1 2 / 4 5 1 2 N U s e r G u i d eSelecting Fonts Selecting fonts is rarely done manually, due to the use of WYSIWYG(What You See Is What You Get) application software, which enablesyou to control the look of your output from the computer monitor.There may be times, however, when you want to print older text fileswithout going through application software. At such times, you canprint files straight to the printer, using the printer’s default font. Any ofthe printer’s resident fonts can be set as the default, as described in thefollowing section.Changing the FontNumber SettingYou can set the printer’s default font at the Control Panel. Table 4.5 liststhe procedure. The factory default is 0 (zero). The ‘=X’ indicates thecurrent setting, the ‘=N’ indicates a new setting, and the asterisk (*)indicates that the new setting has been entered.Table 4.5 Using the Control Panel to change the font number settingTask Key PressSequence† Action/Response Display ShowsChange the FontNumber setting.Choices:0-45On Line Takes the printer off-line. Printing MenuItem Displays the Copies item. Copies=XItem Displays the Font Number item. Font Number=XUp or Down Changes the font number. Font Number=NEnter Saves the new value. Font Number=N*On Line Returns the printer on-line. PCL 5e A4/A4† The number of menus and menu items will vary, depending on whether or not you have option boards installed in the printer.Therefore, the number of times you have to press the Menu or Item key may vary from that shown in this table.NoteThe PCL 5e Font List contains the names and corresponding numbers ofthe fonts that can be set with the Font Number item. Downloaded fontscannot be selected through the Control Panel.