Xerox DocuPrint C525 A User Manual

Also see for DocuPrint C525 A: Quick reference guide

Contents

Xerox DocuPrint C525 A User Manual Manual pdf 37 page image

4.2 Description of Menu Items 374.2 Description of Menu ItemsThis section describes the items that can be configured on each menu.Tray SettingsUse the [Tray Settings] menu to define the paper size and type loaded in each tray.Note• When the size or type of paper that is loaded is different from the setting, the print quality may fall orpaper may jam. Specify the correct paper type and size.• When installing the optional 250 sheet or 500 sheet feeder if [Paper Source] is set to [Auto] on the printdriver, the feeding tray is automatically specified according to the setting on the control panel. Also,when installing two optional feeder and the paper size and type setting for each tray is the same, printingcontinues by changing the feeding tray if the paper in the specified tray has run out.Item DescriptionDisplay Popup Specifies whether to display the message that prompts you to set the paper size andtype or not every time you load paper to the bypass tray or paper tray (optional). Whenyou select [On], the message that prompts you to set the paper size and type isdisplayed. This item is displayed when the [Bypass Mode] is set to [Panel Specified], orthe optional 250 sheet or 500 sheet feeder is installed.• [Bypass Tray] (default: [Off])• [Optional Tray] (default: [On])Note• [Optional Tray] is displayed only when the optional 250 sheet or 500 sheet feeder isinstalled.• [Bypass Tray] is displayed only when the [Bypass Mode] is set to [Panel Specified].Bypass Mode Specifies the way to set the paper type and size settings to be loaded in the bypass tray.• [Panel Specified]You can specify the paper type and size settings on the control panel. Printing can bedone only when the settings on the print driver matches the settings on the controlpanel.• [DriverSpecified] (default)You cannot specify the settings on the control panel. Printing is done using thesettings on the print driver.Paper Type Specifies the type of paper loaded in each tray. This item is displayed when the [BypassMode] is set to [Panel Specified], or the optional 250 sheet or 500 sheet feeder isinstalled.• [Tray 1] (default: [Plain])• [Tray 2] (default: [Plain])• [Bypass Tray] (default: [Plain])Note• [Tray 1] and [Tray 2] are displayed only when the optional 250 sheet or 500 sheetfeeder is installed.• [Bypass Tray] is displayed only when the [Bypass Mode] is set to [Panel Specified].Paper Size Specify the paper size and orientation for each tray. This item is displayed when the[Bypass Mode] is set to [Panel Specified], or the optional 250 sheet or 500 sheet feederis installed.• [Tray 1] (default: [A4 Portrait])• [Tray 2] (default: [A4 Portrait])• [Bypass Tray] (default: [Driver Size])Note• [Tray 1] and [Tray 2] are displayed only when the optional 250 sheet or 500 sheetfeeder is installed.• [Bypass Tray] is displayed only when the [Bypass Mode] is set to [Panel Specified].• Select [Driver Size] when loading custom size paper in the bypass tray.