5.5 Message List 555.5 Message ListThis section describes the messages displayed on the control panel.Messages About ConsumablesMessages About the Printer and Other Items (In Alphabetical Order)XXXX indicates any of the Yellow, Cyan, Magenta, Black or Drum.Message Condition/Reason/ActionXXXX CartridgeError 009-xxxAn unsupported XXXX (toner cartridge or drum cartridge) is installed.Replace the XXXX cartridge.XXXX CartridgeReplace soonThe drum cartridge or toner cartridge is nearly empty. Prepare a new XXXX cartridge(drum cartridge or toner cartridge) so that you can replace it when the message toreplace it is displayed. You can still print about another 1,000 pages for tonercartridge 4K, about 750 pages for toner cartridge 1.5K, or about 1,400 pages for thedrum cartridge even when this message is displayed.*Load XXXXCartridgeThe specified toner cartridge or drum cartridge is either missing or not fully insertedinto the printer. Reinsert the specified XXXX cartridge.Non-genuineToner The custom mode is selected. The prescribed functions and performances may notbe kept because the print quality is not guaranteed in the custom mode. Also, it maycause the printer to malfunction. Use the toner cartridges which are recommendedby Fuji Xerox.Refer to• Custom mode: “5.7 About Custom Mode” (P. 60)Remove DrumCartridgeWhen you install the printer for the first time, install the toner cartridge first and theninstall the drum cartridge. Remove the drum cartridge once and then install the tonercartridge. After that install the drum cartridge.Replace XXXXCartridgeThe specified toner cartridge or drum cartridge needs to be replaced. Replace thespecified XXXX cartridge.* The possible number of pages that can be printed differs according to factors such as the print contents, paper size,paper type, environment used, and the frequency that the printer is switched on and off. For details, refer to “AppendixA.3 Life of Consumables and Regular Replacement Parts” (P. 86).Message Condition/Reason/Action004-310Reboot printerThe printer and the optional 250 sheet or 500 sheet feeder are not connectedcorrectly. Switch off the printer, reinstall the feeder correctly, then switch on theprinter again. If this does not solve the problem, contact our Customer SupportCenter or your dealers.004-311Reboot printerThe printer and the optional duplex unit are not connected correctly. Switch off theprinter, reinstall the duplex unit correctly, then switch on the printer again. If this doesnot solve the problem, contact our Customer Support Center or your dealers.