Xerox Fax Modem 4215/MRP Operation Manual
Also see for 4215: Quick startInstallation planning guideReference guideUser guideOperator's guide
                                                        | |
Contents
| 
TROUBLESHOOTINGPrinter Configuration ReportThe Hardware Status section of the Printer Configuration Reportreports the following information on the status of the faxmodem:• When the fax modem is installed and working properly,“Installed” is reported.• When not installed, “Not Installed” is reported.• If the fax modem has failed, “Failed” is reported.The Fax Setup section of the Printer Configuration Report reportsthe following default fax settings:Fax mode Reports which mode is currently in place with the fax modem:send and receive, send only, receive only, disabled.Clock setup Reports the date and time currently set for fax reporting.Send setup Reports how a fax is to be sent.Redial count—Reports the number of redial attempts currently inplace.Redial interval—Reports the time period between redialattempts currently in place.Transmission resolution—Reports if the resolution for outgoingfaxes is set at fine or standard.Speaker—Reports if the speaker is enabled or disabled.Header—Reports if a header is printed on outgoing faxes.Receive setup Reports how a fax is to be received.Ring count—Reports the number of rings to allow beforeanswering on incoming faxes.Input tray—Reports which paper tray is selected as the defaultinput tray for incoming faxes.Automatic tray switching—If enabled, “Enable (Trays 4,1,2,3)” isreported.Output destination—Reports which default output tray isselected for incoming faxes.Refer to the ”Getting started” chapter in the Xerox MRP Family4220/MRP, 4230/MRP Operator Guide for the procedures to printthe report and a report example.6-4 XEROX MRP FAMILY FAX MODEM FOR MACINTOSH OPERATOR GUIDE |
Related manuals for Xerox 4215
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine