Xerox FaxCentre 2121 User Manual

Also see for 2121L - FaxCentre B/W Laser: Specifications User guide Installation instructions Quick reference guide User manual

Contents

6-2OperationNote: You can also dial the fax number before positioning the originals on thedocument feeder.Choosing the resolution/contrastResolutionThere are 4 modes for document transmission.The mode choice depends on the type of document to be transmitted:• NORMAL mode. To be used for good quality documents, without drawings or smalldetails,• FINE mode, symbolized by FIN at the bottom of the display screen. To be used fordocuments with drawings or small characters,• SUPER FINE mode, symbolized by SFIN at the bottom of the display screen. To beused for documents with very fine or small character drawings,• PHOTO mode symbolized by PHOTO at the bottom of the display screen. To beused for photographic documents.To select the resolution mode:¾ Press the key as many times as necessary to select the required mode. A J iconon the screen shows the current mode.Note: Normal mode is assumed if no other mode is selected.ContrastAdjust the contrast if the document is too light or too dark. If the document is light,increase the contrast and if it is too dark, reduce the contrast.To set the contrast:¾ Press as many times as necessary to adjust the contrast.DiallingFrom the directoryDialling alphabetically¾ Enter the subscriber’s name with the alphanumeric keypad, until the name iscomplete.