Xerox Phaser 3320 Service Manual

Also see for Phaser 3320: Specifications Installation guide Service manual

Contents

Xerox Phaser 3320 Service Manual Manual pdf 93 page image

Error TroubleshootingPhaser 3320 and WorkCentre 3315/3325 Xerox Internal Use OnlyService Manual2-40Output Bin FullThe Output Bin Full Sensor detected that the tray is 90% full.Applicable Error• 08-700: Output Bin fullInitial Actions• Clear the output bin of paper.• If problem persists use the following procedure.Troubleshooting Reference TableTroubleshooting Procedure TableApplicable Parts Wiring and Plug/Jack Map Reference• Out-bin Full Sensor, PL3.1.18• Main Board, PL1.0.11 (Phaser 3320,)PL6.1.6 (WorkCentre 3315/3325)• Phaser 3320 System Wiring on page 7-20• WorkCentre 3315 System Wiring on page 7-25• WorkCentre 3325 System Wiring on page 7-31Step Actions and Questions Yes No1. Check that the Out-bin Full Sensor isinstalled correctly.Does the error persist?Replace the Out-bin FullSensor (page 4-77) andgo to step 2.Complete.2. Reseat P/J6 on the Main Board.Does the error persist?Go to step 3. Complete.3. Replace the Main Board (page 4-55). Complete.