Printing using WindowsXerox Phaser 3320DN/DNIUser Guide38Paper TabUse the Paper tab options to set thebasic paper handling specificationswhen you access the printerproperties.CopiesThis allows you to choose the numberof copies to be printed. You can select1 to 999 copies.Paper Options• Size: This allows you to set thesize of paper required forprinting. If the required size isnot listed in the Size box, selectEdit. When the Custom PaperSetting window appears, set thepaper size and select OK. Thesetting appears in the list so thatyou can select it.• Source: Use this option to selectthe paper tray required. Use the bypass tray when printing on special materials like envelopes andtransparencies. If the paper source is set to Auto Select, the printer automatically selects thepaper source based on the requested size.• Type: Set Type to correspond to the paper loaded in the tray selected. This will provide the bestquality printout. If printing envelopes, ensure the Envelope tab is selected and the envelopesloaded into the bypass tray.• Advanced: The advanced paper options allow you to select a different paper source for the firstpage of your document. From the drop-down menu, select the paper tray containing the paperrequired.Scaling OptionsThis allows you to automatically or manually scale your print job on a page.• Fit to Page: This allows you to scale your print job to any selected paper size, regardless of thedigital document size.• Percentage: Use this option to change the contents of a page to appear larger or smaller on theprinted page. Enter the scaling rate in the Percentage input box.
