Safety10 Phaser 6600 Color PrinterUser GuideElectrical SafetyThis section includes:• General Guidelines............................................................................................................... 10• Power Cord .......................................................................................................................... 10• Emergency Turn Off ............................................................................................................. 11• Telephone Line Cord ............................................................................................................ 11• Laser Safety ......................................................................................................................... 12General GuidelinesWARNINGS:• Do not push objects into slots or openings on the printer. Touching a voltage point orshorting out a part could result in fire or electrical shock.• Do not remove the covers or guards that are fastened with screws unless you areinstalling optional equipment and are instructed to do so. Turn off the printer whenperforming these installations. Disconnect the power cord when removing coversand guards for installing optional equipment. Except for user-installable options,there are no parts that you can maintain or service behind these covers.The following are hazards to your safety:• The power cord is damaged or frayed.• Liquid is spilled into the printer.• The printer is exposed to water.• The printer emits smoke, or the surface is unusually hot.• The printer emits unusual noise or odors.• The printer causes a circuit breaker, fuse, or other safety device to activate.If any of these conditions occur, do the following:1. Turn off the printer immediately.2. Disconnect the power cord from the electrical outlet.3. Call an authorized service representative.Power Cord• Use the power cord supplied with your printer.• Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end ofthe cord is connected securely. If you do not know if an outlet is grounded, ask an electrician tocheck the outlet.