TroubleshootingPhaser 6600 Color Printer 143User GuidePrinter Resets or Turns Off FrequentlyProbable Causes SolutionsThe power cord is not plugged into theoutlet correctly.Turn off the printer, confirm that the power cord is plugged incorrectly to the printer and the outlet, then turn on the printer.A system error occurred. Turn off the printer, then turn it on again. Print the Error Historyfrom the Information Pages of the Printer Setting Utility. If theerror persists, contact your Xerox representative.The printer is connected to anuninterruptible power supply.Turn off the printer, then connect the power cord to a suitableoutlet.The printer is connected to a power stripshared with other high-power devices.Plug the printer directly into the outlet or into a power strip that isnot shared with other high-power devices.Printer Does Not PrintProbable Causes SolutionsThe printer is in Energy Saver mode. Push the control panel button.The printer has an error. Follow the instructions on the control panel to clear the error. Ifthe error persists, contact your Xerox representative.The printer is out of paper. Load paper into the tray.A toner cartridge is empty. Replace the empty toner cartridge.The Error Indicator is blinking. If the Ready Indicator is off, the printer has stopped working. Turnoff the printer, then turn it on again. If the error persists, contactyour Xerox representative.Both control panel indicators are off. Turn off the printer, confirm that the power cord is plugged incorrectly to the printer and the outlet, then turn on the printer. Ifthe error persists, contact your Xerox representative.