Installation and SetupPhaser 6600 Color Printer 59User Guide• Larger Size directs the printer to replace the paper with a longer size paper before printingin 100% magnification ratio.• Use Bypass Tray directs the printer to use the paper size in the Bypass Tray.18. Press OK. To return to the previous menu, press the Left arrow button.19. To have letterhead print on both sides of the page, navigate to LetterH Dup Mode, then pressOK.20. To select a setting, press the Up or Down arrow buttons, then press OK. To return to theprevious menu, press the Left arrow button.21. To have information pages print on both sides of the page, navigate to 2 Sided Report.22. To select a setting, press the Up or Down arrow buttons, then press OK. To return to theprevious menu, press the Left arrow button.23. If you have purchased additional memory, you can enable and configure the RAM Disk feature.This feature allocates memory to the RAM Disk file system for collating, Secure Print jobs, andsaved jobs.a. Navigate to RAM Disk, then press OK.b. To enable the RAM Disk feature, use the Up or Down arrow buttons to select Enable, thenpress OK.c. To specify the amount of memory to allocate to the RAM Disk file system, use the Up orDown arrow buttons, then press OK.d. Turn off the printer, then turn it on again.Note: Not all Xerox ® printers support every option. Only available options appear on your printer.Configuring Tray SettingsUse this menu to configure the paper trays for the paper size and type, set custom sizes, and turn thedisplay prompts on and off.To configure the tray settings:
