Printer ConfigurationsPhaser® 7400 Color Printer1-7OptionsThe following options are available on the Phaser 7400 Color Printer. Print the Configurationpage to see which options are installed on your printer. To print the Configuration page,see Information Pages on page 1-10.Available TraysTray 1 (MPT) and Tray 2 are standard on all configurations. The following additional traycombinations are supported:■ Tray 3: One 550-Sheet Feeder (standard on the Phaser 7400DT printer)■ Trays 3 and 4: Two 550-Sheet Feeders■ Trays 3–5: One 1650-Sheet High-Capactiy Feeder (standard on the Phaser 7400DXprinter)■ Trays 3–6: One 550-Sheet Feeder and one 1650-Sheet High-Capacity Feeder (standard onthe Phaser 7400DXF printer)FinisherThe finisher provides stapling, saddle stapling, and hole punching for a variety of paper andmedia. It is available with either a 2- / 3-hole punch (110 V finisher) or a 4-hole punch(220 V finisher). The finisher is standard on Phaser 7400 DXF printers, and is optional on allother configurations. The finisher requires a hard drive, a 550-Sheet Feeder, and a 1650-SheetHigh-Capacity Feeder.MemoryAll configurations have two memory slots supporting 256 MB and 512 MB SODIMMmodules (up to a maximum of 1 GB).Internal Hard DriveThe following printing options are available with the optional hard drive:■ Secure Print Jobs■ Proof Print Jobs■ Personal Print Jobs■ Saved Print JobsDuplex UnitA Duplex Unit can be added to the Phaser 7400N printer to provide automatic 2-sidedprinting. The Duplex Unit is standard on all other configurations.Downloaded From ManualsPrinter.com Manuals
