Xerox Phaser 7400DN User Manual

Also see for 7400DN - Phaser Color LED Printer: Brochure & specs Accessories guide Accessory guide Supplementary guide User guide

Contents

Xerox Phaser 7400DN User Manual Manual pdf 83 page image

Choosing Output OptionsPhaser® 7400 Color Printer3-54Selecting Stapling from the Printer DriverTo select a stapling option for a specific print job:Using the Hole PuncherIf your printer has a finisher, you can have your print copies punched. Depending on yourregion, the finisher is configured with either a 2- / 3-hole punch or a 4-hole punch. Todetermine which option is installed on your printer, print the Configuration page from thecontrol panel; see Information Pages on page 1-10.Hole punching is supported for the following paper sizes and weights:■ Paper up to 305 mm (12 in.) wide■ Paper within the weight range 64–120 g/m 2 (17–31 lb. Bond, 24–43 lb. Cover)Hole punching is not supported for specialty media including envelopes, transparencies, andlabels.Punching OptionsThe following punching options are available from the printer driver:■ None: Print copies are not punched.■ 2 Holes: When the 2- / 3-hole punch is installed, two holes are punched in the paper.■ 3 Holes: When the 2- / 3-hole punch is installed, three holes are punched in the paper.■ 4 Holes: When 4-hole punch is installed, four holes are punched in the paper.Hole OrientationThe placement of the holes depends on the options you select in the printer driver and whetherthe paper is loaded in the paper tray so that the long edge or the short edge enters first. TheWindows printer driver shows a sample image with the hole placement based on selectedorientation and feed direction.See also:Loading Paper on page 3-8Operating System StepsWindows 98 SE,Windows Me,Windows 2000,Windows XP,Windows Server2003, orWindows NT 4.x1. Select the Output Options tab.2. Select the stapling option from the Stapling drop-down list.Mac OS 9 orMac OS X, version10.2 and higher1. In the Print dialog box, select Finishing Options from the drop-downlist.2. Select the stapling option.Downloaded From ManualsPrinter.com Manuals