Printing on Specialty MediaPhaser® 7400 Color Printer3-424. When the control panel prompts you to confirm the type and size of paper in the tray,select Change setup, and then press the OK button.a. Select Labels as the paper type, and then press the OK button.Note: If you are printing on unusually heavy labels, select Heavy Labels. For moreinformation, see Supported Paper and Media on page 3-3.b. Select either Letter SEF or A4 SEF, and then press the OK button.5. In the printer driver, select Tray 1 as the paper source and/or select Labels as the papertype.Printing Glossy PaperGlossy paper within the weight range 120–160 g/m 2 can be printed from Tray 1 (MPT). Itshould be printed on one side only.To order paper, transparencies, or other specialty media, contact your local reseller or go towww.xerox.com/office/supplies.Guidelines■ Do not open sealed packages of glossy paper until you are ready to load them into theprinter.■ Leave glossy paper in the original wrapper, and leave the packages in the shipping cartonuntil ready to use.■ Remove all other paper from the tray before loading glossy paper.■ Load only the amount of glossy paper you are planning to use. Do not leave glossy paperin the tray when you are finished printing. Reinsert unused glossy paper in the originalwrapper and seal.■ Rotate stock frequently. Long periods of storage in extreme conditions can cause glossypaper to curl and jam the printer.Downloaded From ManualsPrinter.com Manuals
