Printing on Specialty MediaPhaser® 7400 Color Printer3-32Printing on Specialty MediaThis section includes:■ Printing Transparencies on page 3-32■ Printing Envelopes on page 3-37■ Printing Labels on page 3-40■ Printing Glossy Paper on page 42■ Printing Custom Size Paper on page 3-45For information about printing on other types of specialty media, see theAdvanced Features Guide at www.xerox.com/office/7400supportPrinting TransparenciesTransparencies can be printed from Tray 1 (MPT) and Tray 2. They should be printed on oneside only.For best results, use only transparencies that are recommended for your printer. For moreinformation, see the Recommended Media List at www.xerox.com/office/7400supportTo order paper, transparencies, or other specialty media, contact your local reseller or go towww.xerox.com/office/supplies.Caution: Damage caused by using unsupported paper, transparencies, and other specialtymedia is not covered by the Xerox warranty, service agreement, or Total SatisfactionGuarantee. The Total Satisfaction Guarantee is available in the United States and Canada.Coverage may vary outside these areas; please contact your local representative for details.Guidelines■ Remove all paper before loading transparencies in the tray.■ Do not load more than 50 transparencies in Tray 1 (MPT). Do not load more than200 transparencies in Tray 2. Overloading the tray may cause the printer to jam.■ Handle transparencies by the edges using both hands to avoid fingerprints and creases,which can cause poor print quality.■ After loading the transparencies in the tray, use the control panel to change the paper typeto Phaser 35-Series Transparency.Downloaded From ManualsPrinter.com Manuals
