Xerox WNA-100 User Manual
Also see for WNA-100 - Bridge: Setup and configuration guideInstallation guideSpecificationsSpecifications
                         | |
Contents
|
Configuring the Adapter Using Your Web BrowserXerox WNA-100 Wireless Network Adapter2-5Do the following if you want to configure the adapter from your wireless network:1. Click the Change button in the Default Configuration Interface section of theAdministrative Utilities page. A secondary dialog box appears.2. Click the drop-down menu in the secondary dialog box and select Wireless.3. Click the Submit button.4. Click the Restart button in the Reset section of the Administrative Utilities page.This causes the adapter to accept all the configuration settings you just made. If the Ethernetport is connected to a printer, the adapter prints a page on the printer. This page contains theconfiguration settings of the adapter.Do the following after you have configured the adapter to work in your wireless network:1. Disconnect the Ethernet crossover cable from the host computer.2. Connect the adapter to the printer using the same cable.3. Set up your PC for use in your wireless network.The adapter and printer should be operating on the wireless network. Use the LED lights toindicate the status of the adapter. See Hardware on page 1-3 for more information.If your PC is connected to the wireless network, you can type the IP address of the adapter inyour browser’s address/location bar to see if the adapter is working as expected.If the adapter or printer are not working as expected, see Troubleshooting WirelessConfiguration Problems on page 3-2.Optimizing the Wireless Network ConnectionUse the following tips to ensure that the adapter is functioning at its best:■ Make sure the antenna is screwed into the adapter before starting configuration. Theadapter will not get reception without the antenna.■ Place the wireless adapter in a central location and away from walls and metal objects thatmay block reception.■ Use a wireless repeater to extend the range of your wireless adapter.■ Avoid using cell phones or other wireless electronics nearby. |
Related manuals for Xerox WNA-100 - Bridge
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine