Xerox WNA-100 User Manual
Also see for WNA-100 - Bridge: Setup and configuration guideInstallation guideSpecificationsSpecifications
                         | |
Contents
|
Configuring the ScreensXerox WNA-100 Wireless Network Adapter2-6Configuring the ScreensThe following section describes the user interface screens for the wireless setup. For moreinformation, see the Wireless Network Adapter Online Help.StatusThe Status page displays current device status information.Wireless ConfigurationThe following configurations allow your wireless device to talk to your wireless network:■ WEP Settings (Wireless Encryption Protocol): Security protocol for wireless networksdefined by the 802.11b standard.■ WPA Settings (Wi-Fi Protected Access): Protocol that improves upon the securityfeatures of WEP.■ EAP Settings (Extensible Authentication Protocol): Authentication protocol that supportsa number of authentication methods.■ Advanced Settings: Settings for the radio link configuration.TCP/IP ConfigurationThe following configurations define the network configurations of your wireless interface:■ BOOTP/DHCP Settings (Dynamic Host Configuration Protocol): Allows for automaticTCP/IP settings.■ TCP/IP Settings: Allows you to set your TCP/IP settings if BOOTP/DHCP is disabled.Specifically:■ IP Address■ Network Mask■ Default Router■ Network Services: Allows you to enable or disable specific TCP/IP settings:■ Telnet■ FTP■ SNMP■ DDNS■ DNS/DDNS Settings (Dynamic Domain Name Service): Allows you to manuallyconfigure your DNS settings and automatic name registration.■ SSL (HTTPS) Settings: Secure HTTP allows you to encrypt the transmission to thedevice during configuration.■ SNMP Settings (Simple Network Management Protocol): Allows you to use standardSNMP tools to configure the wireless interface. |
Related manuals for Xerox WNA-100 - Bridge
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine