Xerox WNA-100 User Manual
Also see for WNA-100 - Bridge: Setup and configuration guideInstallation guideSpecificationsSpecifications
                         | |
Contents
|
Troubleshooting Wireless Configuration ProblemsXerox WNA-100 Wireless Network Adapter3-3The printer does not appear on the network after you connected the adapter■ Is the power unit securely plugged into the wall?■ Is the power supply cord securely plugged into the adapter?■ Is the Ethernet crossover cable securely plugged into the adapter? (It will click when it issecurely plugged in.)■ Is the Ethernet crossover cable securely plugged into the printer? (It will click when it issecurely plugged in.)■ Is the printer’s network configuration correct for the network being used? For example, isthe printer's IP address reachable on their network? (You can print out the printer’s internalconfiguration and information page using the control panel.)One of the best debugging techniques is to start with a very simple set up to get the adapterworking. Then add one additional complex feature at a time. Make sure each feature isworking before proceeding to the next feature.Set up the adapter using the following settings. Then change the SSID setting. Then changethe Authentication setting. Then change the Encryption setting, etc.Ethernet Settings on the adapter■ Mode: Auto speed detect■ Settings appropriate for the TCP/IP networkWireless■ Mode: Ad-hoc■ Radio: 802.11a-b-g■ Channel: 11■ SSID: Xerox wireless network adapterWireless Security■ Encryption: None (open system)■ Authentication: None (open system)Online Support AssistantThe Online Support Assistant is a knowledge base that provides instructions andtroubleshooting help to solve your adapter problems.To access the Online Support Assistant, go to www.xerox.com/office/wna. |
Related manuals for Xerox WNA-100 - Bridge
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine