Initial SetupAccessing the PrinterThe system administrator can set access rights on the printer to ensure that unauthorized users cannotaccess the printer. If the system administrator configures authentication and authorization, users requirea login and password to access some or all of the features of the printer. The administrator can alsoconfigure accounting to require an accounting code to access tracked features.Logging InLogging in is the process by which you identify yourself to the printer for authentication. Ifauthentication is set, to access printer features, you log in with your user credentials. The systemadministrator user name is admin and the default password is 1111.Logging In at the Control Panel1. At the printer control panel, press the Machine Status button.2. Touch Tools > Admin Settings.3. Type the passcode using the keypad.4. Touch OK.Note: Repeat steps 3 and 4 of the procedure to access each service that is password protected.Logging In to CentreWare Internet ServicesWhen Administrator Mode is enabled, the Jobs, Address Book, Properties, and Support tabs are lockeduntil you enter the administrator user name and password.To log in to CentreWare Internet Services as the administrator:1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer onpage 12.2. Click the Jobs, Address Book, Properties, or Support tab.3. Type the administrator user name.4. Type the password, then type the password again to verify.Xerox ® WorkCentre® 3615 Black and White Multifunction Printer 13System Administrator Guide
