Scanning1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printeron page 12.2. Click Properties.3. In the left pane, under Protocols, click Email Settings.4. For Enter the From: Email Address, type the email address that you want to use to send emails fromthe printer.Note: Before you click Auto Detect SMTP Server, to save your entries, click Save Changes.5. For SMTP Server, enter the IP Address or DNS Name of the SMTP server. If you do not know the IPAddress or DNS Name of the SMTP server, click Auto Detect SMTP Server.6. For SMTP Port, enter the port number for the SMTP server.7. If the SMTP server requires authentication, select the Authentication Type, then enter the SMTPLogin Name and SMTP Password. If the login feature is not used, select No Authentication.Note: When you select SMTP AUTH (Auto), the printer automatically supportsPlain/Login/CRAM-MD5. SMTP AUTH (Auto) works for most SMTP servers.8. To verify the status of the SMTP Server Connection, click Refresh Status.9. Click Save Changes.Note: Ensure that the authentication type is compatible with your SMTP server.10. If authentication is required, for the SMTP server, enter the SMTP Login Name and password.11. Re-enter the password.12. Scroll down, then click Save Changes.Setting Up Scanning With USBIf the printer is connected using a USB cable, you cannot scan to an email address or a network location.You can scan to a folder on your computer, or scan into an application after installing the scan driversand the Express Scan Manager utility.Starting Express Scan ManagerTo start Express Scan Manager on Windows computers:1. Click Start > All Programs > Xerox Office Printing.2. Select your printer from the list.3. Double-click Express Scan Manager.94 Xerox ® WorkCentre® 3615 Black and White Multifunction PrinterSystem Administrator Guide
