SecurityTo set the IP address or host name to appear on the control panel screen:1. To set the IP address or host name to appear on the control panel screen, for Display NetworkInformation, select an option.2. Click Save Changes.To encrypt the data on the device memory:1. Click the Device Memory Data Encryption link.2. For Encryption, select On.3. Enter an Encryption Key for the printer, then reenter the key.Note: All stored data is deleted after you change the Data Encryption Settings.4. Click Save Changes.To limit the number of attempts allowed when a user logs in as an administrator:1. To limit the number of attempts allowed when logging in as an administrator, for Login Attempts,select an option.2. Click Save Changes.Network AuthenticationNetwork Authentication is a security protocol that requires users to provide their login credentials beforethey can access the printer. The printer compares the user credentials to the information stored on anauthentication server. To prove their identity, users can type their user credentials at the control panel, inCentreWare Internet Services, or they can use a card reader.To configure access rights using network authentication:• Provide information about your authentication server and configure authentication server settings.• Enable Panel Lock. For details, see Managing Panel Lock on page 74.• Ensure that service locks are set. For details, see Setting Service Locks on page 75.• Ensure that Network Authentication is enabled. For details, see Configuring Secure Settings on page77.To access the authentication system:1. In CentreWare Internet Services, click Properties > Security.2. Click Authentication System.See also:• Configuring a Kerberos Authentication System on page 69• Configuring Xerox Secure Access Settings on page 68• Configuring LDAP Authentication on page 68Xerox ® WorkCentre® 3615 Black and White Multifunction Printer 67System Administrator Guide
