SecurityTo change the passcode:1. At the printer control panel, press the Machine Status button.2. Touch Tools > Admin Settings.3. At the prompt, enter a four-digit passcode, then touch OK.4. Use the Up or Down arrows to navigate, then touch Secure Settings.5. Touch Panel Lock, then touch Change Passcode.6. At the prompt, enter a four-digit passcode, then touch OK.7. At the prompt, enter the new passcode, then touch OK.8. At the prompt, re-enter the passcode, then touch OK.9. Touch the Back arrow to return to the previous menu, or press the Services Home button to returnto Service Home.Setting Service LocksA list of installed services appears in this menu and lets you configure the way they appear on thecontrol panel for non-authorized users. Each service can be set from a selection of access levels.Note: Panel Lock must be enabled before setting the service locks.To set the service locks:1. From the Secure Settings menu, to navigate to the menu with the service listed, use the Up or Downarrows.2. Touch a service name.3. Touch an access option.− Enabled: Non-authorized users can access the service.− Password Locked: Authorized users can access the service. Enter a passcode or, if networkauthentication has been enabled, enter a user name and password.− Disabled: Access to the service is blocked.4. Touch OK.Note: After setting a service lock for fax access, at the Restart prompt, touch Close.Authentication Using a Card Reader SystemWhen Xerox ® Secure Access authentication is configured, users swipe a pre-programmed identificationcard at the control panel. The printer compares the user credentials to the information stored on theConvenience Authentication server.For details, refer to the documentation provided with your authentication software.Xerox ® WorkCentre® 3615 Black and White Multifunction Printer 75System Administrator Guide
