12 Network Accounting114 Xerox WorkCentre 4260 Series System Administration Guide22. Touch [Close].23. Press the button.24. Touch [Confirm] to exit the Tools Pathway.Verify that Network Accounting is Enabled25. Press the button on the Control Panel.26. The Touch Panel should display a screen with two buttons. One is the [User ID] andthe other is the [Account ID]. This indicates the system has enabled accountingsuccessfully.Activate the machine27. Open the Network Accounting application and configure it so that the TCP/IPaddress (or fully-qualified domain name) of machine is entered as the destination forretrieval of data. Refer to the manufacturer's documentation with your NetworkAccounting server to complete this task.Enable Network Accounting in your Print DriverTo record print jobs sent to the machine, Accounting must be enabled in the user’s printerdriver.NOTE: If Accounting is enabled on the machine but not in the printer driver, any print orLAN fax jobs sent to the machine will be deleted.Win 20001. From the [Start] menu, click on [Settings] and [Printers].2. Right-click on the machine printer icon.3. Click on [Properties].4. Click on [Configuration].5. Click on [Accounting].6. Click on [Xerox Network Accounting] from the Accounting System menu.7. Click on either [Prompt for Every Job] if you want Users to enter their User andAccount ID each time they print or click on the [Default Users] and [Account ID]checkboxes to hide the User and Account ID information (then no entry is requiredfor each job submission).8. Click on [Use Default Accounting Codes] and enter the default Account ID.9. Click on the [OK] button.10. Click on the [OK] button to exit.Win XP or Vista1. From the [Start] menu, click on [Printers and Faxes].2. Right-click on the machine printer icon.
